Universal Audio’s Apollo Twin MkII Quad is a desktop audio interface that offers two mic preamps and next-generation A/D and D/A conversion derived from UA’s well-respected rackmount units....
Universal Audio’s Apollo Twin MkII Quad is a desktop audio interface that offers two mic preamps and next-generation A/D and D/A conversion derived from UA’s well-respected rackmount units. Included is a bundle of proprietary plug-in versions of famous analog mixer channels, preamps, and effects through which you can track in real time with near-zero latency.
The Twin MkII comes with digital emulations of the Teletronix LA-2A compressor, Pultec EQs, and other legendary recording tools of the analog world. In addition to its stellar sound, the Apollo interface offers the advantage of powering plug-ins with its own DSP, thus allowing you to keep the latency of your DAW very low. If that all sounds very “techy,” it is. The Console software that comes with the hardware offers complex enough routing possibilities to please a seasoned recording engineer, but is streamlined enough for home studios and guitar recording enthusiasts.
I was able to plug the Twin MkII in, turn it on, and begin recording without so much as cracking the manual. This was because the ins and outs are obvious, and the one basic knob and a few buttons on the surface make things easy. Pushing the Preamp button causes the knob to control input level. Further pushing chooses line or mic level. If you plug in a guitar, the Apollo automatically chooses the Unison Hi-Z for a realistic feel when using amp models. Pushing the Monitor button lets the big knob set your speaker and/or headphone monitoring level.
UA’s amplifier models (Fender ’55 Tweed Deluxe, Fuchs Overdrive 50, emulations of Marshall, Engl, Friedman, and other amps) will set you back between $149 and $249 each, but you can try them free for 14 days before you buy. I found them comparable to other modeling plug-ins, but using the